Review




Structured Review

ANSYS inc electric field distribution simulations
Electric Field Distribution Simulations, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electric+field+simulation/pm40410358-51-3-10
Average 90 stars, based on 1 article reviews
electric field distribution simulations - by Bioz Stars, 2026-11
90/100 stars

Images

Related Articles

other:

Article Title: Switchable edge-line coupler based on parity time-reversal duality symmetry
Article Snippet: Figure 7 Amplitude of the electric field at 29.8 GHz simulated with Ansys HFSS 2020 , ( a ): 4x4 unit celles in the central region (design of Fig. ); ( b ): 2X2 cells in the central region (design of Fig. b).

Article Title: On-chip electrostatic discharge sensor
Article Snippet: Electric field simulation of the structure in ANSYS Maxwell as a function of the width of the dielectric between the pads (namely, separation between sharp corners), is shown in FIG.

Article Title: Compact <i>E</i>-Band Sheet Beam Folded Waveguide Traveling Wave Tube for High Data Rate Communication
Article Snippet: The design of a compact E-band (71–76 GHz) sheet beam (SB) folded waveguide (FWG) traveling wave tube (TWT) for high data rate communications is presented in this article.. The round beam tunnel for a pencil FWG slow wave structure (SWS) has been redesigned with a rectangular beam tunnel to be suitable for the SB with increased beam current.. A novel periodic permanent magnet (PPM)–periodic quadrupolar magnet (PQM) focusing system has been developed to reduce the beam ripple and improve the transmission ratio.

Article Title: Resistive switching of Sn-doped In 2 O 3 /HfO 2 core-shell nanowire: geometry architecture engineering for nonvolatile memory.
Article Snippet: Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content.. The journal’s standard Terms & Conditions and the ethical guidelines, outlined in our author and reviewer resource centre, still apply.. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains.

Article Title: Research on non-destructive and rapid detection technology of foxtail millet moisture content based on capacitance method and Logistic-SSA-ELM modelling
Article Snippet: In view of this above, the electric field simulation of the designed differential structure capacitance sensor is carried out using ANSYS software.

Article Title: Parameter Estimation for a Capacitive Coupling Communication Channel Within a Metal Cabinet Based on a Modified Artificial Immune Algorithm
Article Snippet: It is worth mentioning that the value boundaries (0, 0.5 nF) are determined by the rough capacitance obtained by electric field simulation in ANSYS Maxwell.

Bacteria:

Article Title: Rapid, low cost microfabrication technologies toward realization of devices for dielectrophoretic manipulation of particles and nanowires
Article Snippet: 0 d This paper describes rapid, low cost microfabrication technologies used to fabricate dielectrophoresis (DEP) devices that can be used for anipulation, enrichment and separation of particles, microorganisms, and nanowires.. Dielectrophoresis-based manipulation has tremendous otential for application as an integral part of biochips, micro-total-analysis systems, and lab-on-a-chip technologies.. All DEP devices have icroelectrodes (Ti/Au or Cr/Au) defined on a glass substrate.

Permeability:

Article Title: Measurements of an expanding surface flashover plasma
Article Snippet: Measurements of an expanding surface flashover plasma J. R. Harris Citation: Journal of Applied Physics 115, 193302 (2014); doi: 10.1063/1.4876677 View online: http://dx.doi.org/10.1063/1.4876677 View Table of Contents: http://scitation.aip.org/content/aip/journal/jap/115/19?ver=pdfcov Published by the AIP Publishing Articles you may be interested in Residual charge density distribution measurement of surface leader with feedback electrostatic probe Appl.. Phys.. Lett.



Similar Products

90
COMSOL Inc simulate the electric field distributions
Simulate The Electric Field Distributions, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/simulation+result+of+the+electric+field+distribution/pmc10963007__pnas__2319465121__sapp-86-8-4
Average 90 stars, based on 1 article reviews
simulate the electric field distributions - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc 6.0 finite-element electric field simulation
6.0 Finite Element Electric Field Simulation, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/6+0+finite+element+electric+field+simulation/pm40573647-4-4-3
Average 90 stars, based on 1 article reviews
6.0 finite-element electric field simulation - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc finite element electric field simulation
Finite Element Electric Field Simulation, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/finite+element+electrostatic+simulation/pm40501443-113-4-3
Average 90 stars, based on 1 article reviews
finite element electric field simulation - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc electric field simulation
Electric Field Simulation, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electric+field+simulation/10__1016_slash_j__cej__2025__162774-71-5-18
Average 90 stars, based on 1 article reviews
electric field simulation - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
ANSYS inc electric field distribution simulations
Electric Field Distribution Simulations, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electric+field+simulation/pm40410358-51-3-10
Average 90 stars, based on 1 article reviews
electric field distribution simulations - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc 2d electric field maps simulated using comsol multiphysics
(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL <t>Multiphysics,</t> this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.
2d Electric Field Maps Simulated Using Comsol Multiphysics, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/comsol+multiphysics/pmc12095583-230-14-14
Average 90 stars, based on 1 article reviews
2d electric field maps simulated using comsol multiphysics - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
ANSYS inc simulations for the electric field plots
(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL <t>Multiphysics,</t> this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.
Simulations For The Electric Field Plots, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/simulations+for+the+electric+field+plots/pmc12095667-272-4-10
Average 90 stars, based on 1 article reviews
simulations for the electric field plots - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc simulation of flow and electric field distribution
(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL <t>Multiphysics,</t> this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.
Simulation Of Flow And Electric Field Distribution, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electric+current+and+flow+field+analyses/pm40055868-280-0-0
Average 90 stars, based on 1 article reviews
simulation of flow and electric field distribution - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
COMSOL Inc simulation for the electric field
(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL <t>Multiphysics,</t> this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.
Simulation For The Electric Field, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electric+field+simulation/pm40085708-82-9-36
Average 90 stars, based on 1 article reviews
simulation for the electric field - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
ANSYS inc dc finite element electric field simulations ansys maxwell
(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL <t>Multiphysics,</t> this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.
Dc Finite Element Electric Field Simulations Ansys Maxwell, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/electric+field+simulation/electromagnetic+analysis+program+ansys+maxwell/10__1103_slash_physrevlett__134__097001-60-13-19
Average 90 stars, based on 1 article reviews
dc finite element electric field simulations ansys maxwell - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results


(a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL Multiphysics, this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.

Journal: Scientific Reports

Article Title: Inverse designed aperiodic multilayer perfect absorbers for mid infrared enable tunability switchability and angular robustness

doi: 10.1038/s41598-025-99995-6

Figure Lengend Snippet: (a): Simulated using the finite-difference time-domain (FDTD) method, this plot shows the normalized electric field intensity along the z-direction for multiple values of graphene chemical potential (µc = 0 to 1 eV). The simulation domain includes the air region above the structure, which allows visualization of both external and internal field behavior. At µc = 0.0 eV, where the structure is optimized for maximum absorption, the electric field in the air remains nearly constant, exhibiting an almost flat profile. This behavior indicates excellent impedance matching at the air-absorber interface, with negligible reflection—a hallmark of perfect absorption. As µc increases, the field confinement inside the multilayer weakens, confirming the switchable nature of the absorber.(b): Simulated using COMSOL Multiphysics, this panel shows the spatial distribution of the electric field inside the structure for two states: µc = 0 eV, with strong field localization, and µc = 1 eV, where the internal field intensity is significantly reduced. This independently confirms the tunable suppression of absorption and the modulation of plasmonic resonances in the multilayer stack.

Article Snippet: To further validate these findings, Fig. (b) presents 2D electric field maps simulated using COMSOL Multiphysics for two representative chemical potentials: μc = 0 eV (top) and μc = 1 eV (bottom).

Techniques: